Filter
Top Products
[ 19 ]
MEMORY DIALING
MEMORY DIALING
Chain Dialing
The 10 memory locations on the handset are not limited to phone numbers, you may
want to store in memory a group of numbers (up to 16 digits) that you need to enter
once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, when
you are prompted to enter the account number, simply press
mm
and then the location
where the special number has been stored.
Store your special number in memory as you would a phone number.
(Refer to "Storing a Phone Number in Memory", on page 17.)
Enter a "pause" in the sequence as necessary. A "pause" counts as one digit and
represents a two second delay in time between digits as they are sent.
Erasing a Stored Number from Memory
1)Remove the handset from the base unit.
2)Press
mm
twice.
3)Press the memory location (0-9). A tone indicates that the stored number is
erased from memory.
You cannot erase the
phone numbers by using
m1, m2, or m3. These
are the numbers stored
in memory location 1, 2,
and 3.