Filter
Top Products
[ 12 ]
GETTING STARTED
8)Raise the antenna to a vertical position.
9)Align the mounting slots on the base with the mounting posts on the wall. Then
push in and down until the phone is firmly seated.
DDiirreecctt wwaallll mmoouunnttiinngg
If you don’t have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that
could cause a hazard, when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive
lengths.
• Make sure the wall material is capable of supporting the weight of the base
and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable
for the wall material where the base unit will be placed.
1)Insert two mounting screws into the wall, (with their
appropriate anchoring device), 3-15/16 inches apart. Allow
about 1/8 of an inch between the wall and screw heads for
mounting the phone.
2)Set the retainer clip if necessary.
3)Refer to steps 1 through 9 on pages 11 and 12 to mount
the telephone.