Filter
Top Products
[ 23 ]
THE INTEGRATED
ANSWERING DEVICE
THE INTEGRATED ANSWERING DEVICE
SSeettttiinngg tthhee TTiimmee
The clock on the EXA2950 answering system starts when power is applied to the
base. Follow these steps to set the clock to the correct time.
• Normally the idle
time for the menu
mode is 20 seconds
before the system
returns to standby.
However for setting
the time, the idle
time is extended to
two minutes.
• Press and hold
sskkiipp//ffff
or
rreeppeeaatt//rreeww
to
quickly scroll through
numbers on the
display.
1)Press
mmeennuu
twice.
The system announces the current time. The message
counter displays [ ].
2)Press
sseett
to select the day.
You hear the current day and the number ([
0
] through
[
6
]) is displayed on the base.
3)Press
sskkiipp//ffff
or
rreeppeeaatt//rreeww
until the correct day is
announced and the corresponding number is displayed.
4)Press
sseett
to select the day.
5)Press
sskkiipp//ffff
or
rreeppeeaatt//rreeww
until you hear the correct
hour setting. The numbers [
1
] through [
12
] are displayed
on the base as each hour is announced.
6)Press
sseett
to select the hour.
7)Press
sskkiipp//ffff
or
rreeppeeaatt//rreeww
until you hear the correct
minute setting. The numbers [
00
] through [
59
] are
displayed on the base as each minute is announced.
8)Press
sseett
to select the minute.