Filter
Top Products
[ 38 ]
ADDITIONAL INFORMATION
SSyymmppttoomm
After a power failure, the
outgoing message is deleted.
No sound on the base unit
speaker during call monitoring
or message playback.
Cannot access remote call-in
features from another
touch-tone phone.
If you still have a problem.
SSuuggggeessttiioonn
• Record your personal outgoing message again. The default message
should remain.
• Adjust the speaker volume on the base unit.
• Make sure you’re using the correct PIN code.
• Make sure that the touch-tone phone you’re using can transmit the tone
for at least two seconds. If it cannot, you may have to use another
phone to access your messages.
• Call our customer hot line at 1-800-297-1023.