Filter
Top Products
GETTING STARTED[ 6 ]
Read this First
This cordless telephone must be set up before use. Follow these steps:
Step 1 (page 7)
Unpack the telephone and accessories.
Step 2 (page 8)
Next, choose the best location to
set up the main base unit.
Step 3 (page 9 to 11)
Then, insert the battery packs into the
handsets. Connect the main base unit
and extra charging cradle. You must
charge the battery packs for 15-20 hours
before plugging into the telephone
line and using the phone.
Conveniently, your cordless
phone allows you to transfer
outside calls from handset to
handset, simply by pressing the
transfer key. Not to worry,
conversations will not be
interrupted; only one handset at a
time can talk with an outside
caller. The second handset cannot
go off hook to listen to
conversations or make an
outgoing call while the other
handset is in use.
Step 4 (page 12)
After fully charging the batteries, register the extra handset
to the main base unit. Remove the handset from the extra
charging cradle, then place it on the main base for at least
5 seconds while the base LED flashes. Registration should
now be complete.
Step 5 (page 40 to 48)
Finally, set the answering system.
DXAI388-2 7/16/2 11:54 AM Page 6