Filter
Top Products
GETTING STARTED
GETTING STARTED [ 13]
• If the extra handset’s
battery becomes very
low, the handset must
be recharged for
15-20 hours and
re-registered to the
main base unit.
• Make sure to return
the handsets to the
charging cradles after
each phone call.
• If you transfer the
call and it is not
picked up after
5 minutes, the call
will be disconnected.
When to Re-register Handsets
1) You’ll need to re-register the extra handset (follow steps on page 12) each time
the digital security code is changed. Refer to page 55 for details regarding the
Digital Security Code.
2)
When there is a power failure for more than one hour
If power failure occurs (e.g. due to electrical storm or if the unit is unplugged
during a move), both handsets will need to be re-registered. To re-register,
follow the same registration process on page 12.
Call Transfer Feature
Conveniently, your cordless phone allows you to transfer outside calls from handset
to handset, simply by pressing the transfer key. Not to worry, conversations will
not be interrupted; only one handset at a time can talk with an outside caller. The
second handset cannot go off hook to listen to conversations or make an outgoing
call while the other handset is in use.
To transfer a call (to the second handset)
1) Press delete/transfer during a call. The call will
automatically be placed on hold and the transfer tone sounds.
To cancel the transfer, press delete/transfer or talk/flash on
the handset.
2) When the other handset receives the call, the transfer tone stops.
To receive a transferred call (from the second handset)
Pick up the handset (when AutoTalk is set to On), or pick up the
handset and press talk/flash to answer the transferred call.
Additionally, you can answer the transferred call by pressing any
number key,
*
/tone/ , or #/ (when AutoTalk is set to On).
Transfer Call
Hold
Transfer Call
DXAI388-2 7/16/2 11:54 AM Page 13