Filter
Top Products
THE INTEGRATED ANSWERING DEVICE[ 44 ]
status
1) Press menu three times.
You hear “Ring time” and the current ring time ([ ] 2, [ ]
4, [ ] 6, [ ] Toll saver), and it is displayed
on the main base.
2) Press repeat/rew or skip/ff until the desired ring time
appears.
3) Press set/ringer to select the new ring time. You hear a
confirmation tone, then the announcement “Ring time” and
the new ring time is announced.
Setting the ring time
The ring time setting allows you to set the number of rings the caller hears before
your answering system plays the outgoing message. You can set the ring time to
answer after two, four, or six rings. Setting (Toll Saver), the answering system
picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can
hang up after the second ring to avoid billing charges.
DXAI388-2 7/16/2 11:55 AM Page 44