Filter
Top Products
GETTING STARTED[ 16 ]
Setting Menu Options
There are four setup options available. They are Caller ID options [AutoTalk, CIDCW
(Caller ID on Call Waiting), Area Code] and Dial Mode.
AutoTalk allows you to answer the phone without pressing the talk/flash button. If
the phone rings when AutoTalk is on, simply remove the handset from the main base
and the phone automatically answers the call. If the phone rings when AutoTalk is
off, you must press talk/flash to answer the call.
CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by
using Handset 2, you will not see these options listed on the LCD screen.
To confirm which handset is HS1, refer to the display indicating “
HS1” or “HS2”.
AutoTalk and Area Code options can be set by using either Handset 1 or Handset 2.
Refer to the following screen.
Caller ID options
To change your AutoTalk and CIDCW:
1) Press and hold cid/menu. The following screen appears.
2) Use and or a number key (1 and 2) to move the pointer
to the selection that you would like to change.
Press select/channel to toggle between ¨
On¨ and ¨Off¨ for AutoTalk and CIDCW.
3) Press end and return the handset to the main base unit. The handset returns to
the standby mode.
If your calling area
requires 10-digit
dialing, do not program
this option.
DXAI388-2 7/16/2 11:54 AM Page 16