Filter
Top Products
GETTING STARTED[ 14 ]
Mounting the Main Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Plug the AC adapter into the DC IN 9V jack.
2) Route the AC adapter cord through the molded wiring
channel as shown.
3) Plug the AC adapter into a standard 120V AC
wall outlet.
4) Plug the telephone line cord into the TEL LINE jack.
Route the cord through the molded wiring channel as
shown.
5) Plug the telephone line cord into the telephone outlet.
6) Align the mounting slots on the main base with the mounting posts on the wall.
Then push in and down until the phone is firmly seated.
DO NOT use an AC outlet
controlled by a wall
switch.
DXAI388-2 7/16/2 11:54 AM Page 14