Filter
Top Products
QUICK REFERENCE GUIDE [ 3]
Step 1 Charging the Batteries
TO INSTALL THE HANDSET BATTERIES
1
Remove the cover.
TO CHANGE CALLER ID OPTIONS
1
Press and hold cid/menu.
2
Press or to move the pointer to an
option.
3
Press select/channel to change the option
setting.
4
Press end and return the handset to the
main base.
1
Plug AC adapter cord into the main base
unit and extra charging cradle and then
into a 120V AC outlet. (Use only the
supplied AD-420 AC adapter.)
2
Place one handset on the main base and
place the other handset in the extra
charging cradle.
It does not matter which handset is placed
on the main base and extra charging cradle.
2
Connect the battery
pack connector with
the correct polarity.
3
Replace the cover.
TO PLUG INTO AC POWER
Note: You must charge the batteries continuously
for 15 - 20 hours before using the phone.
Note: Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
Note: CIDCW can only be changed on HS1.
QUICK REFERENCE GUIDE
Step 2 Connecting
Step 5 Setting Up the Answering System
Step 3 Before Using, Register Extra Handset to Base
1
After fully charging the handsets, remove
the handset from the extra charging cradle
and place it on the main base.
(Base status LED light will begin to flash
indicating registration is occurring.)
2
Wait for at least 5 seconds before removing
the extra handset from the main base.
Congratulations, the registration has been
completed, and your dual handset cordless
phone is ready for use!
Step 4
Setting Up the Caller ID
TO RECORD A PERSONAL GREETING
1
Press and hold greeting until you hear
“Record greeting” and a confirmation tone.
2
Record your personal greeting. (Position
yourself as near to the main base as
possible and speak clearly.)
3
When finished press greeting again or
play/stop.
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the main base unit and then into a
telephone wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see “Choose
the dialing mode” on page 18.
TURN THE ANSWERING SYSTEM ON
Press answer on/off.
A pre-recorded greeting will play and your system
is ready to accept calls.
DXAI388-2 7/16/2 11:54 AM Page 3