1r
Power
Your scanner's nickel-cadmium battery can
power the scanner for up to 5 hours on a full
charge.
Before you use the scanner the first time,
and whenever the [BA TT] indicator appears,
you should fully charge the battery.
Notes:
. Install the battery before you charge it.
. When the [BATT] indicator appears,
there is about 10 minutes of power left.
If you don't turn off the scanner within 10
minutes, it automatically turns off to
prevent the battery from fully
discharging.
Getting Started
Installing/Removing the Battery
1. Turn off the scanner.
2. Slidethebatteryon.
To remove the..battery, press the release
button and slide the battery off.
I
~
~
.
5