Uniden UBC3000XLT Two-Way Radio User Manual


 
2. Select the channel.
j" - -'1- - - 12- - - 131
(0 SCAN):6) @ @.: Enterthe
1 1 channel
I 14 15 16,
OMANUA 1 @ @ @: number.
BSAVE 1 17 18 19I
E3 (3: 0 @ @: Then,
n r press
(3 (3 d: @)2O:@
1-- __I
BANK
93 Ll5L1.162sMHz
12.5 KHz NFM
3. Lockout the channel.
Press
11 12 13
(OSCANJ 6) @ @
<:0 IIAN~ @f @15 @16
BSAVE 17 18 19
8130@@
9FT 20
€Jao@@
BANK
93 Ll5L1.162SIIHzI
UO 12.5KHz NFM ~
22
For more information, see
- "The Manual Mode" on Page32.
- "The Scan Mode" on Page 20.
Locking a Channel While Scanning
If the scanner keeps stopping on a particular
channel due to noise or too-frequent
transmissions, you may want to keep that
channel from scanning.
1. Wait until the scanner stops at the channel.
BANK
SCAN
~1
BD Ll5L1.725 MHz
12.5 KHz NFM
2. Then:
Press
11 12 13
~6)@@
14 15 16
~@@@
8 l3E 07 @18 @19
9FT 20
€][30@@
The scanner immediately resumes scanning
because that channel is no longer in the
scanning sequence.
Unlocking a Channel
Note: Empty channels are automatically
locked. You cannot unlock an empty
channel.
1. Enter the Manual Mode.
Press
(0 SCAN)
t 0 IIAN~
BSAVE
88
01 @12 @13
@/ @15 €f
07 @18 @19
~
9FT 20
B80@@
Note: Because the channel is
locked-out, you cannot use the Scan
Mode to select it.