Filter
Top Products
--:--..
5. Store the frequency.
BANK 1
p 1 lf50.150 11Hz
12.5 IOta NFII
The channel number stops flashing and
a beep sounds.
If the frequency is stored in another
channel, you hear a beep and the other
channel appears in the display.
BANK 1
p ~.n CH 3lf
12.5 IOta NFM
Further press @ to store the frequency in
the selected channel, or press <!) twice to
cancel.
Repeat these steps to program more
channels.
Use the banks to store similar frequencies
(e.g., local police frequencies) together.
This helps the UBC3000XL T scan faster.
Notes:
. If you make a mistake, press <!)
twice and start over.
. If you enter an invalid frequency, a
beep sounds and ERROR appears.
Repeat Step 4.
Automatic Battery Save
If you let the UBC3000XL T sit idle while you
are programming channels (as you look up
more frequencies, for example), the scanner
may switch to the Battery Save Mode. The
display does not change.
To conserve batteries, the UBC3000XL T
switches to Battery Save when:
. In Manual Mode
. Delay is OFF
. No signal is received for 60 seconds
11
11 12 13
(OSCAN) 6) @ @
14 15 18
@@@
8 BE 07 @18@19
8FT 20
B80@@
Press