Filter
Top Products
You can call your answering system from any touch-tone phone and monitor sounds
in the room where your base is installed.
1. Call your telephone number. (Either
line 1 or line 2)
2. While the answering machine is activated, press
# and your PIN code.
3. The answering system begins announcing the time and day.
4. Press
# then 5 to stop the massages.
5. Press
# then 0. You hear sounds in the room where your phone is installed.
After 15 seconds, the answering system returns to the command waiting mode.
6. Press
# then 0 to monitor the room for another 15 seconds. Or select another
remote function. Or hang up to exit the system. The answering system
automatically returns to standby.
52
REMOTE ROME MONITOR
You cannot use # and 0
while the new messages are
playing. Press # then 5 to
stop message playback first
and go to step 5.
When the speakerphone is in use, the room monitor feature cannot
be activated form an outside line.
EXS9995 11/9/00 15:55 Page 52