Filter
Top Products
▼ Initial battery charging
Before connecting your phone for the first time, charge the rechargeable battery pack
for 15-20 hours without interruption.
1. Place the handset on the base.
2. Make sure that
status LED lights.
If the LED doesn’t light, be sure the AC
adapter is plugged in and the handset
makes good contact with the base
charging contacts.
▼ Charging optional battery packs
The base of your phone is equipped with a compartment for charging an extra
battery pack for use in your handset. You can obtain an extra battery pack
from your authorized Uniden dealer.
1. Pull the cover of battery charger.
2. Put the battery pack in the compartment
with contacts facing down.
3. Replace the charge cover.
4. Charge the battery for 24 hours. When charging is complete, and spare battery is
needed, lift the latch to remove the battery pack. To install the charged battery
into the handset, see Installing the Handset Battery Pack, page 8.
9
CHARGING THE BATTERY PACK
Please visit your authorized
Uniden dealer to obtain an
extra battery pack or contact
the Uniden Parts Department
at (800) 554-3988. Hours are
from 8:30 a.m. to 5:00 p.m.
Central Standard Time,
Monday through Friday.
In the event of a power failure, your spare battery pack temporarily
provides power for the base so you can still use your phone.
status LED blinks red when the base is powered by the spare battery.
EXS9995 11/9/00 15:54 Page 9