Filter
Top Products
4. If you want to set CIDCW, use the ▲ and ▼
keys to move the cursor to 2 CIDCW or
you can press 2.
Press the select key to toggle between
On and Off.
5. After you finish the setting, press
call id/hold
and return the handset to the base.
▼ Programming Your Area Code
1. Press and hold
call id/hold for two
seconds. The following screen appears.
2. Use the
▲ and ▼ keys or the number
key (1 or 2) to select
Line 1 or
Line 2. Then press select.
The following screen appears.
3. Use the
▲ and ▼ keys to move the cursor
to select
3 Area Code:
Press
select. Use the number keypad to enter
or change the area code. Press select again.
4. After you have made your selections, press
call id/hold and return the handset to the base.
▼ Screening Your Calls
Caller ID allows you to review caller
information before answering your
phone. At the beginning of the second
ring, the display shows the line number,
that is being used, name, and phone number of the caller. If your Caller ID
service is number only, the name does not appear on the second line.
If a name or number is not available, the display shows a message such as
Incomplete Data, Private Number, Private Name, etc.
35
Caller ID Setup
1 Line 1
2 Line 2
Line 1
Smith John
817-555-1212
1 Auto Talk : Off
2 CIDCW : On
3 Area Code :
1 Auto Talk : Off
2 CIDCW : On
3 Area Code :
EXS9995 11/9/00 15:55 Page 35