Filter
Top Products
Your phone may be used with an optional
headset, the Uniden HS910. To use this
feature, simply plug the headset plug into
the headset jack. Your phone is ready for
hands-free conversation.
13
HEADSET INSTALLATION
AUTOMATIC DIGITAL CODE SECURITY
Use only the Uniden HS910
headset specifically designed
for Spread Spectrum phones.
You may hear a buzz or
hum on other headsets.
Keep the headset wire away
from handset and base
antennas.
To prevent other parties from making unauthorized calls on your phone line, a
digital code was added to the EXS 9995. Your phone’s handset and base share this
code. If the phone experiences a power failure, you must reset the digital security
code by placing the handset in the base.
▼ To reset the digital security code
1. Remove the handset from the base,
hold down
page/int’com and you will
hear the beep.
2. Replace the handset on the base while
holding
page/int’com. The paging stops.
3. Wait for 5 seconds.
The
status LED flashes to indicate that
the digital security code is reset.
If you are using an optional headset, you must still use the handset
keypad for phone operations.
EXS9995 11/9/00 15:54 Page 13