Uniden 986-2 Cordless Telephone User Manual


 
ADDITIONAL INFORMATION [ 43]www.uniden.com
Symptom
Severe noise interference.
The Caller ID does not
display.
Handset No.1 or No.2 is not
working.
Unavailable message is
displayed on the LCD screen
of the handset.
The handset doesn’t
communicate with the main
base or the other handset.
No 3-way conversation.
Voice Message Indication does
not work.
If you still have a problem.
Suggestion
•Keep both handsets away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
•Move to another location or turn off the source of interference.
•The handset was picked up before the second ring.
•The call was placed through a switchboard.
Call your local telephone company to verify your Caller ID service is current.
Charge the handset.
•Make sure the battery pack is connected to the handset and fully charged.
•Make sure the other handset is not already in use. Both handsets cannot be in
talk mode at the same time.
Place the handset in the main base for at least 5 seconds to re-register to the
main base.
•Make sure the handset is not too far from the main base when trying to use.
•Re-register both handsets (see page 14).
•Make sure that you have registered the second handset.
Only one handset at a time can talk with an outside caller. To allow the other
handset to talk to the caller, transfer the call.
Contact your local telephone company to make sure that your telephone
receives FSK message signaling.
Reset the indicator by pressing and holding the find hs key for 5 seconds.
Call our customer hotline at 1-800-297-1023.
ADDITIONAL
INFORMATION
UC427ZH (DXI986-2) 10/20/03 10:53 AM Page 43