Filter
Top Products
GETTING STARTED [ 17]www.uniden.com
1) When the phone is in standby mode, press and hold the
caller id/menu key. The Caller ID setting screen appears.
2) Press the vol/ / key twice to select
Area Code.
3) Press the select/channel key.
4) Use the number (0 - 9) or delete/transfer key to enter the
3-digit area code.
5) Press the select/channel key. A confirmation tone sounds and the displayed area
code is entered.
6) Press the end keyor return the handset to the main base unit or charging cradle
to complete the setting. The handset returns to standby mode.
When the area code has already been stored in memory, the stored
area code will be displayed. To change it, use the delete/transfer
key and number keys to enter the new area code.
Then press the select/channel key. A confirmation tone sounds.
To complete the setting, press the end key or return the handset
to the main base unit or charging cradle.
GETTING STARTED
Make sure your battery
pack is fully charged
before choosing the
dialing mode.
Entering Your Area Code
If you enter a 3-digit area code number in the Area Code option, your local area
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local
area code, you will see a full 10-digit number.
UC427ZH (DXI986-2) 10/20/03 10:52 AM Page 17