Uniden 986-2 Cordless Telephone User Manual


 
BASICS [ 21]www.uniden.com
Redial
The redial/pause key redials the last number dialed. The redialed number can be up
to 32 digits long.
Tone Dialing Switch-over
Some telephone companies use equipment that requires
pulse dialing (sometimes referred to as rotary dialing).
If you need to enter tone dialing digits, you can
switch-over to tone dialing during the call. This feature is
useful when you need tone dialing to use automated
systems, for example, entering your bank account number
after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call connects, press
the /tone/ key. Enter the desired number. These digits will be sent as tone
dialing. Once the call ends, the tone mode is canceled and pulse dialing mode
resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your main base unit,
noise increases. If you pass the range limits of the main base unit, your call will
terminate within 5 minutes.
•The tone feature only
applies when the dial
mode is set to pulse.
This special number
can be stored in a
memory location. This
is referred to as Chain
Dialing (see page 28).
BASICS
UC427ZH (DXI986-2) 10/20/03 10:52 AM Page 21