Filter
Top Products
Step 2 Install and Charge the Handset Batteries
TO INSTALL THE HANDSET BATTERIES
(see page 10 for details)
Charge the handset battery packs for at least
15-20 hours before using your new cordless
telephones for the first time!
When the handset battery packs are
fully charged, after 15-20 hours of
charging, plug the telephone cord
into the main base unit and then
into a telephone wall jack.
Your phones are set for tone dialing. If your local
network requires pulse dialing, please see
“Choosing the dialing mode” on page 18.
A
Remove the cover.
Use only the Uniden
rechargeable battery
packs supplied with your
new phones!
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
A
Press and hold the caller id/menu key in
standby mode.
B
Press the vol/ / or vol/ / key to
move the pointer to an option.
C
Press the select/channel key to change the
option setting.
D
Press the end key to exit, and return the
handset to the main base.
OPTIONS INCLUDE
A
Auto Talk On/Off
B
CIDCW On/Off
(Caller ID on Call Waiting)
C
Area Code Enter/Remove
D
Dial Pulse/Tone
D
Plug each AC adapter cord into each charging
cradle and then into each 120V AC outlet.
Use only the Uniden AC adapters supplied
with your new phones!
E
Place the handset in the main base and
place the other handset in the charging
cradle, and then charge continuously for
15 - 20 hours before using the phone.
B
Connect the battery Pack
connector with the
correct polarity.
C
Replace the cover.
Note: There are five setup
options available. They are
Caller ID options (AutoTalk,
CIDCW [Caller ID on Call
Waiting], Area Code), Dial
Mode and Language
(see page 16 for details).
QUICK REFERENCE GUIDE
Step 3 Connect to Phone Line
Step 5
Setting Menu Display Options
Uniden Parts Department
at (800) 554-3988
Hours: M-F 8:00 a.m. to
5:00 p.m. CST.
or visit our website at
www.uniden.com for
replacement parts.
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Parts Department.
• Main base unit (1)
• Handset (2)
• Charging cradle (1)
• AC adapter (2)
• Rechargeable battery (2)
• Telephone cord (1)
• Beltclip (2)
• This owner’s manual (1)
• Other printed material (1)
QUICK REFERENCE GUIDE [ 3]www.uniden.com
Step 1 Checking the Package Contents
E
Language English/French/Spanish
A
After fully charging both handsets, remove
the second handset from the extra
charging cradle and place in the main base
unit. The main base LED light will flash
indicating registration is occurring.
B
Wait for at least 5 seconds before removing
handset. Once registration is complete, the
cordless phone is ready for use.
Step 4 Register 2nd Handset to Main Base
UC427ZH (DXI986-2) 10/20/03 10:52 AM Page 3