Filter
Top Products
GETTING STARTED[ 12 ] www.uniden.com
•Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to either
cradle after a
telephone call.
• Talk Mode -
The handset is off
either charging cradle
and the talk/flash key
has been pressed,
enabling a dial tone.
• Standby Mode -
The handset may be
sitting in or off either
charging cradle but is
NOT in use. The
talk/flash key has not
been pressed and there
is no dial tone.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the
charging contacts on both handsets once a month. Using
water only, dampen a cloth to clean the charging
contacts. Then make sure to go back over the charging
contacts with a dry cloth before returning the handsets to
the main base unit or charging cradle to charge.
Caution: Do not use paint thinner, benzene, alcohol, or
other chemical products. Doing so may discolor the
surface of the telephone and damage the finish.
Dial mode setting, last number dialed, names and numbers stored
in memory locations (including RocketDial), CID list are retained
for up to 30 minutes while you replace the battery pack.
Low battery alert
When the battery pack is very low and needs to be charged, the
phone is programmed to eliminate functions in order to save
power. If the phone is not in use,
Low Battery appears on the
LCD and none of the keys will operate.
If the phone is in use,
Low Battery flashes and the handset
beeps. Complete your conversation as quickly as possible and
return the handset to either charging cradle for charging.
UC427ZH (DXI986-2) 10/20/03 10:52 AM Page 12