Uniden DECT2085 Cordless Telephone User Manual


 
2222
Expanding Your Phone
Expanding Your Phone
Adding Accessory Handsets
Your phone supports a total of six cordless handsets. You can now place a fully-featured cordless handset anywhere
AC power is available to connect the handset charger. All the handsets ring when a call is received.
Compatible Handsets
Your phone is compatible with the DCX200. If you purchased an accessory handset separately, you must register the
handset to the base before use. Accessory handsets will not operate until they are registered.
Charging Accessory Handsets
The handset’s battery recharges automatically when the handset is placed in the charger.
Use only the Uniden PS-0007 AC adapter.
Use the supplied AC adapter to connect the
DC
IN 9V jack to a standard 120V AC outlet.
Set the charger on a desk or tabletop, and
place the handset in the charger with the LCD
screen facing forward.
Make sure that the
charge LED illuminates. If
the LED does not illuminate, check to see that
the AC adapter is plugged in and the handset
makes good contact with the charging contacts.
Charge the handset battery pack for at least 15-
20 hours before using your new handset for the
rst time.
1)
2)
3)
4)
Route the cord.