Filter
Top Products
11
Installing the Phone
12
Wall Mounting the Base
This phone can be mounted on any standard wall plate.
Insert the two hooks on the
wall mount adapter into the
holes on the upper rear of
the base. Slide the adapter
up as far as it will go
(about 1/4 of an inch).
Gently press in
on the tabs at
the bottom of the
adapter. Slide
the bars under
the hooks on the
base.
Route the telephone cord through the hole of
the wall mount adapter, and plug the
telephone cord into the telephone wall jack.
Connect the AC adapter
to the DC IN 9V jack and
let the cord hang below
the wall mount adapter.
Connect the
telephone cord
into the TEL
LINE jack.
Wall plate
(To AC outlet)
Route the cord.