Filter
Top Products
MM-008212-001, Rev. A
29
STATUS ICON DESCRIPTIONS
Steady – transmit at low power. Appears in the 5th position of the display.
If icon is not visible – transmit at high power.
Steady – battery charge indicator (refer to Figure 10-4). Appears in the 12th position of the
display
.
Flashing – Low battery indicator (refer to Figure 10-4).
Steady – Indicates the current channel is set up as an analog channel. Appears in the 7th
position of the display.
Steady – group or channel in scan list. Appears in the 10th position of the display.
Steady – priority 2 group or channel. Appears in the 10th position of the display.
Steady – priority 1 group or channel. Appears in the 10th position of the display.
Steady (rotates clockwise) – scan mode enabled. Appears in the 9th position of the display.
If icon is not visible – scan is disabled.
Steady – Channel Guard enabled. Appears in the 4th position of the display.
If icon is not visible – Channel Guard is disabled.
Steady – Indicates the current channel is set up as a ProVoice or Aegis channel. Appears in
the 7th position of the display.
Figure 7-7: Full Cycle Battery Charge Indicator
The battery charge indicators illustrate approximate level only, based on battery voltage. Refer to Figure
8-1.