Filter
Top Products
-
Receive a Called
. .
&ion Message:
1. Press the Msg button.
To Set a Calling Station
Message for Another
Station:
1. Press the
Mode
button when your
telephone is idle.
2. Dial 9 5.
3. Dial the ‘destination”
station number.
4. Press the ‘Page
button.
5. Enter the desired
message number.
6. Press the
Page
button.
,-
Press the
Mode
‘\L
button.
8. Dial 0.
To Send a Message to a
Busy Station:
1. Call the desired
station.
2. Press the
Mode
button.
3. Dial 2.
REMOTE CALLING STATION MESSAGING
The LCD displays “MODE?”
The LCD displays “MODE 95 DEST EKT NO.?”
The LCD displays “MODE 95 DEST EKT NO.NN”.
The LCD displays “MSG NO.?”
The LCD displays the message.
The LCD displays “MSG NO.?”
NOTE:
Group calling station messaging allows you to set a calling station message for
only one station at a time.
The LCD displays “MODE NO.?”
.-
_
Your LCD shows the time and date. The message is displayed at the
“destination” station. Any station calling the “destination” station receives the
message.
BUSY STATION MESSAGING
When reaching a busy LCD station, a message can be sent to that station (an
audible tone will be heard). The busy station may also return a message to the
calling station’s LCD. The two stations may continue this procedure to carry on a
“silent” conversation. Soft Keys must be off (Mode 70) at the sending and
receiving stations for this feature to operate.
Listen for a busy tone.
The LCD displays “MODE NO.?”
The LCD displays “OVER TO STNN MSG NO?”
4-11