Filter
Top Products
r
-r-
Display Busy Field
Jus:
1. Press the
Mode
button.
BUSY FIELD DISPLAY
MODE NO.?
I
2. Dial 1.
3.
Press the
Page
button to rotate Busy
Field groups.
To Exit Any Mode:
1. Press the
Mode
button.
2. Dial 0.
Your telephone must be idle to use the
&lode
button when Soft Keys are turned
ON.
NOTE:
The Busy Lamp Field (BLF) mode will stop all other displays from appearing on
your telephone LCD.
Refer to the figure in Chapter 1 Summary of LCD Functions.
MODE EXIT
The LCD displays “MODE NO.?” Your telephone must be idle to use the
Mode
button when Soft
Keys
are turned ON.
The LCD displays date/day/time.
To Store New
DISA
Security Code:
I. Press the Intercom
button and dial the 3-
digit access code.
2. Dial the new
DISA
security code.
DISA
SECURITY CODE: ADD/DELETE/CHANGE
Direct Inward System Access (DISA) security codes can be added, deleted, and
changed from designated station(s) only. For security purposes, the 3-digit
access code is not given in this guide. It is available from your telephone system
administrator.
To change or delete the
DISA
security code, these steps must be performed
from a station that was selected in system programming.
You will hear a confirmation tone.
The
DISA
security code can be 1
m
15 digits.
NO. NNN
XIII
ID CODE SET
3. Press the Redial
button.
You will hear a confirmation tone.
NO. NNN
DATA PROGRAMMED
I
2-5