Filter
Top Products
2.
Press the
Intercom
button and dial
#
6 2 1.
“USER NAME?” will appear on the upper line of the LCD. Current information
fo*
‘:x1
station 200 will appear on the lower line of the LCD.
.’
USER NAME?
I
3. Press the Page
button.
jOfST#iizz-]
4. Dial the intercom
number (N N N) of the
station for which the
NAME/NUMBER
information is to be
recorded.
In this particular display, “EKT” stands for the intercom number of the digital,
electronic or standard telephone.
5. Press the Page
button.
F=-l
6.
7.
8.
9.
4-6
Enter the new
information via the
dialpad (refer to
Recording a Message
for method)
Press the
Spkr
button.
Repeat steps 2
-
7
to
enter more
names/numbers.
To turn Soft Keys on,
press
Mode 7 1
when your telephone is
idle.
“USER NAME?” will appear on the upper line of the LCD, and
curren
information for station NNN will appear on the lower line of the LCD.
Up to 16 characters can be recorded. It is-recommended that you enter the
station number along with the user’s name.
The new information is stored and appears on the top line of station NNN’s LCD.
Station 200’s LCD returns to the normal idle display.
NOTES:
1. To erase the NAME/NUMBER information of another station from station
ZOO, repeat Steps
I
-
6 above and enter blanks in Step 5. Blanks are
entered by pressing
1
in the alpha mode.
2.
Station NNN may set and clear the NAME/NUMBER feature anytime:
.
H
Set:
Intercom # 6 2 1.’
W
C/ear: Intercom # 6 2 0. “Clear” eliminates the display when
calling, but does not erase it from memory.