Filter
Top Products
VOICE MAIL (VM)
Whenever your station is call forwarded to voice mail, certain digits will
automatically be sent to the voice mail unit to direct the call to your mailbox.
These codes must only be stored one time; they remain in memory until
changed. They do not have to be stored each time you Call Forward your
telephone.
Setting your mailbox number (where calls will go when you forward to the
Toshiba VP voice mail system).
The LCD displays “6 5 6 ID CODE SET”.
.
Assigning a mailbox to
store messages:
1.
Press the Intercom
button.
2. Dial
#
6 5 6.
LT!TEzl
3. Dial the digits (up to
16) and pauses to be
sent.
4. Press the Redial
button to store data.
[OliR],
Assigning a mailbox for
message retrieval:
1.
Press the Intercom
button.
2. Dial
#
6 5 7.
3. Dial the required digits
and pauses to be sent.
4.
Press the
Redial
button to store data.
To Retrieve Messages:
Press the Intercom and
Msg buttons.
To Clear All Digits:
1. Press the Intercom
button.
2. Dial
#
6 5 6 or # 6 5
7.
3.
Press the
Redial
button.
2-4
The LCD displays the digits and pauses. These digits include special voice mail
codes and your mail box number. For example, for Toshiba VP Systems dial
91 NNN, where NNN is your mail box-number.
You will hear a confirmation tone-the LCD displays “DATA PROGRAMED”.
When you want to retrieve your messages from voice mail, certain digits will
,’
automatically be sent to the voice mail unit to play back your messages.
The LCD displays
!‘6
5 7 ID CODE SET”.
The LCD displays the data as it is entered. These digits include special voice
mail codes and your mail box number. For example, for Toshiba VP Systems dial
92NNN, where NNN is your mail box number.
You will hear a confirmation tone-the LCD displays “DATA PROGRAMED”.