Filter
Top Products
n
If you initiated the call, the “TRNS” prompt will appear 30 seconds afterr-
‘I
the first digit of the telephone number is dialed-the “ABR” prompt for
-~,’
Automatic Busy Redial (ABR) will appear during this first 30 seconds (if it
does not appear, then this feature was not assigned in system
programming). If the call is an ‘incoming call, the
“TRNS”
prompt will
appear immediately when you answer
thecall.
2. Press the CONF Soft Key to initiate the Conference.
n The outside call will be placed on hold and the LCD will appear as
follows after you press the CONF Soft Key in Step 2.
3. To transfer to a station, press the STA. Soft Key.
1
Whenever the RTRN Soft‘Key appears, you can terminate the operation
and return to the outside call by pressing the RTRN Soft Key.
. .
I
DIAL STATION NO.
RTRN
I
4. Dial a station number when the following LCD appears:
5. After you dial the station number (203 in this example), you will see one of
the displays below for about three seconds. The display will then change to
the display in Step 6.
CALLING
CALLING
203
Or
TOM BROWN 203
3-2
Called station (203) has “user
Called station (203) has “user
name” turned off.
name” turned on.