Filter
Top Products
To Record a Message:
1. Press the # button to
access alpha
characters. Refer to
Figure 4-l for an
explanation of the
dialpad buttons.
2.
Press
*
or
1
to move
the cursor (-) to the
desired position (the
left edge of the display
for a new message, or
two spaces to the right
of the preprogrammed
message to add
information).
3. Press the button that
has the letter you want
to enter. Use the 0
button to shift from
letter to letter on the
button.
4. If you want to enter a
number, press the #
button to change to
numeric characters.
Press the
#
button
again to return to alpha
characters.
5. The following special
characters are set by
pressing 1 and then
pressing 0 to step
through the available
characters: Q,
Z,
:,
-,
+,
/.
1
button moves
cursor to the right
(also used to access
special characters
and to enter “blanks”
Each button has three
letters that are used in
in the alpha mode)
Jr
button moves the
cursor to the left
0 button is used to shift between the three letters on each
alpha button (also used to access special characters)
I
Figure
4-l
Dialpad information
For example: If you press 3, a “D” will be displayed. By pressing 0, the
“D”
is
changed to “E”. By pressing 0 again, the
“E”
is changed to
“F”.
Press 0 again
and the
“F”
changes to
“D”.
To enter a space, press 1.
Numbers are also entered on the dialpad.
4-2