Telex US2002 Intercom System User Manual


 
Intercom User Station US2002 - 8
Features
1. DYNAMIC-MIC HEADSET CONNECTOR: Accepts headsets with monaural headphones and
either a balanced or unbalanced dynamic microphone.
2. P
ANEL MIC / ELECTRET-MIC HEADSET CONNECTOR: Accepts an electret gooseneck micro
phone, such as the Telex Model MCP-90-XX. The Model MCP-90 series panel mic
connector is a 1/4" stereo plug, with a threaded shaft for easy installation.
3. V
OLUME CONTROL: Adjusts headphone volume only. If an external speaker is used,
volume is adjusted at the speaker.
4. V
OX TRIMMERS: Used with the voice-activated microphone feature. Separate trimmers
adjust the voice activation level for the headset and panel microphones.
5. HEADSET AND PANEL MIC KEYS: Used to manually activate either the headset or panel
microphone, whichever is being used.
6. A
LL TALK KEY: Used to talk to all stations that are listening on all channels. This
includes both US2002 channels and all channels of any connected ES4000A Expansion
Stations.
7. PA K
EY: If the US2002 is connected to a public address system, this key may be
used to talk over the public address system.
8. MIC KILL KEY: Used to turn off the microphones on any intercom stations on a
channel. Also used to activate the program inputs and the audible beep feature
for incoming calls.
9. INTERCOM TALK KEYS: Momentary or latching (hands-free) operation possible.
10. CALL KEYS: Used to place calls on intercom channels and to indicate incoming
calls.
11. INTERCOM LISTEN KEYS: Momentary or latching operation possible.
12. PROGRAM INPUTS CONNECTOR AND TRIMMERS: Each intercom channel has its own
program input and level adjust trimmer. The program inputs may be turned on or
off via the front panel, and they may be set to interrupt during talk if desired.
13. LOCAL POWER JACK: An optional PA-KP local power supply can be connected to
power the US2002 from an AC outlet instead of from the intercom channels.
14. PA OUTPUT: Connects to a public address system.
15. EXPANSION OUT CONNECTOR: Connects to an ES4000A Expansion Station.
16. SPEAKER OUTPUT JACKS: A single powered loudspeaker or dual powered loud
speakers may be connected for monaural or binaural listening.
17. INTERCOM CHANNEL CONNECTORS AND AUDIOCOM / CLEAR-COM* SELECTOR SWITCH: Two
connectors are provided for each channel for loop-through connection of
multiple intercom stations. The selector switch sets the US2002 for compatibility
with either Audiocom or Clear-Com channel connector pin-outs, channel
power requirements, and call signaling requirements.
*Brand names mentioned are the property of their respective companies.