Intercom User Station US2002 - 23
Figure 11. Typical Remote Monaural Speaker Station.
This example is similar to the one on the previous page, except a Telex MCP-90-XX microphone and
a SPK-2000 speaker are used instead of a headset. Make sure the internal DIP switches are set for
monaural speaker operation (default setting) as described on page 10. A PA-KP local power supply
is required for the SPK-2000, but is optional for the US2002. When a PA-KP is connected to the
US2002, the US2002 automatically disconnects from system power. This makes more system power
available for belt packs and other intercom stations. Also, when the US2002 is powered by a PA-KP,
it can be operated over a greater distance as a remote station.
Note: For further
information about the
cable numbers, see
page 14
.