Filter
Top Products
Intercom User Station US2002 - 17
Figure 5. US2002 Binaural Master Speaker Station Configuration with 1 Power Supply.
This is a good configuration for smaller intercom systems when you want to operate the US2002 as a master
speaker station, with a separate speaker for each intercom channel. Make sure the US2002 internal DIP
switches are set for binaural speaker operation as described on page 10. Also, set the SPS2001 Combine/
Isolate switch to the Isolate position. With this setting the 2 intercom channels are completely separated. The
amplified speaker in the SPS2001 is used as the speaker output for channel 1, and the SPK-2000 is used for
channel 2. This PA-KP local power supply is optional. When a PA-KP is connected, the US2002 automatically
disconnects from system power that is supplied by the SPS2001. Since the US2002 is not drawing power from
the intercom system, more system power is available for additional belt packs, etc.
Note: For further
information about the
cable numbers, see
page 14
.
Note: A BOP-1000 may
be used to rack mount
2 TW-7W splitters.