Filter
Top Products
Intercom User Station US2002 - 18
Figure 6. US2002 Master Headset Station Configuration with 1 Power Supply.
This is a good configuration for smaller intercom systems when you want to operate the US2002 as a master
headset station. In this configuration, the PS2001L Combine/Isolate switch is set to the Isolate position. With
this setting the 2 intercom channels are completely separated. Typically, a headset is connected to the front
panel of the US2002, and the US2002 DIP switches are set to monaural operation (default setting) so that both
intercom channels are heard in the monaural headphones (binaural headphone operation is not supported).
The PA-KP local power supply is optional. When a PA-KP is connected, the US2002 automatically disconnects
from system power that is supplied by the PS2001L. Since the US2002 is not drawing power from the intercom
system, more system power is available for additional belt packs, etc.
Note: For further
information about the
cable numbers, see
page 14
.
Note: A BOP-1000 may
be used to rack mount
2 TW-7W splitters.