Filter
Top Products
Intercom User Station US2002 - 16
Figure 4. US2002 Monaural Master Speaker Station Configuration with 1 Power Supply.
This is a good configuration for smaller intercom systems when you want to operate the US2002 as a master
speaker station, with one speaker to monitor both intercom channels. In this configuration, the SPS2001
Combine/Isolate switch is set to the isolate position. With this setting the 2 intercom channels are completely
separated. The amplified speaker in the SPS2001is used as the speaker output for the US2002, and the
US2002 dip switches are set to monaural operation so that both intercom channels are heard in the speaker.
The PA-KP local power supply is optional. When a PA-KP is connected, the US2002 automatically disconnects
from system power (supplied by the SPS2001). When the US2002 is not drawing power from the intercom
system, more system power is available for additional belt pack, etc.
Note: A BOP-1000 may
be used to rack mount
2 TW-7W splitters.
Note: For further
information about the
cable numbers, see
page 14.