Filter
Top Products
Intercom User Station US2002 - 26
Figure 14. External Audio Input and PA Output.
You can connect two audio sources to the Program Inputs connector: one for each channel. Audio
sources can be directly connected with a user-supplied DB9M connector. (Refer to the program input
connector specifications, located on page 34, for connector pin-out.) However, a more convenient
method is to use an XP-USPG Breakout Panel as shown. The XP-USPG lets you use standard, 3-pin
XLR audio cables to connect audio sources. The XP-USPG also interfaces the PA jack of the US2002
to a standard, 3-pin XLR audio cable. Note: The XP-USPG Breakout Panel can be rack mounted
using a BOP-1000 Rack Mount Plate.
Note: For further
information about the
cable numbers, see
page 14
.