Filter
Top Products
Intercom User Station US2002 - 21
Figure 9. US2002 Headset Station Configuration with 2 Power Supplies.
In this configuration, the PS2001L Combine/Isolate switches are set to the Combine position. With this
setting all intercom stations connected to the one PS2001L are combined on intercom channel 1 and
all intercom stations connected to the other PS2001L are combined on channel 2. Typically, a headset
is connected to the front panel of the US2002, and the US2002 dip switches are set to monaural
operation (default setting) so that both intercom channels are heard in the monaural headphones
(binaural headphone operation is not supported). The PA-KP local power supply is optional. When a
PA-KP is connected, the US2002 automatically disconnects from system power. Since the US2002 is
not drawing power from the intercom system, more system power is available for additional belt
packs, etc.
Note: For further
information about the
cable numbers, see
page 14
.
Note: A BOP-1000 may
be used to rack mount
2 TW-7W splitters.