Filter
Top Products
20
Audiocom®
XP-ES4000
12-15 VDC
+
-
3
SPEAKERS
PROGRAM
INPUTS
4
LINE LEVEL
1 VRMS
EXP
OUT
CAN 3-6 OUTPUTS
EXP
IN
5
6
3456
PGM VOLUME
BAL-OUT
UNBAL-IN
Telex
®
FRONT
BACK
CH 3-6
ES4000A
PUSH PUSH PUSH
PUSH
PS2000L Power Supplies
Combine / Isolate Switches
set to Combine
CHN 1
CHN 2
CLASS 2 WIRING 1.5A 24VDC
100-249 VAC 60/50 HZ
MADE IN USA
®
CHN 1
CHN 2
CLASS 2 WIRING 1.5A 24VDC
100-249 VAC 60/50 HZ
MADE IN USA
®
CH 6
CH 5
TO US2000A
EXP IN CONNECTOR
TO THE EXP IN CONNECTOR
OF ANOTHER ES4000A
CH 6
CH 5
1
1
1
1
1
CH 6
CH 5
CH 3
CH 4
TERMINATION
PLUGS
DRY LINES TO REMOTE STATIONS
ON CHANNELS 3 AND 4
1
1
WET LINES TO 1/2 OF REMOTE
MASTER STATIONS OR BELT PACKS ON
CHANNELS 5 AND 6
WET LINES TO 1/2 OF REMOTE
MASTER STATIONS OR BELT PACKS ON
CHANNELS 5 AND 6
1
6
5
5
Figure 12. Using the termination plugs supplied with the ES4000A for mixed
wet- and dry-line operation. In this example, channels 5 and 6 are powered from
a PS2000L Power Supply (wet lines), while channels 3 and 4 are operated without
power (dry lines). Any remote station connected to channel 3 or 4 must supply its
own power. For example, a US2000A that is powered by a PS-L Power Supply
could be connected to channels 3 and 4. The advantage of dry-line operation is
that intercom stations may be operated over a much greater distance.
Note: For further informa-
tion about the cable num-
bers, see page 22.