Filter
Top Products
50
US
Intercom Operation
Talking between the phones – Intercom
– Walkie-Talkie function
(when the system has any other additional cordless
handsets)
You can make an intercom conversation between a couple of cordless handsets
(Walkie-Talkie function) of the same phone system far from the base unit (e.g. use out
of doors). You can start the intercom from any cordless handset. This function works
only when one or more additional cordless handsets are available on the system.
Example: Making intercom call from station
number 1 to station number 2.
1 Press (INTERCOM).
2 When the system has an additional cordless
handset
Skip this step.
When the system has two or more
additional cordless handsets
Turn Jog Dial to choose “TO HANDSET 2”,
and then press Jog Dial.
3 Both cordless handsets ring and
“** INTERCOM 2 **” appears on the
display of the cordless handset whose station
number is 1 and “** INTERCOM 1 **”
appears on the display of the cordless handset
whose station number is 2.
When a person at the cordless handset whose
station number is 2 picks up the cordless
handset from the charger (When Quick talk is
set to “ON”; see page 38), or presses (TALK)
or (INTERCOM), you can talk with each other.
4 When you are done talking, replace the
cordless handset on the base unit or the
charger, or press (OFF).
If no one answers the phone
Press (INTERCOM) again.
Notes
• If there is an incoming outer line call during the intercom conversation between a couple of
cordless handsets (Walkie-Talkie function), intercom call will not be disconnected. When you
answer the outer line call, press (OFF) to end the intercom conversation.
• To check the station number assigned to the cordless handset, see page 26.
Tip
You can receive an intercom call on the cordless handset even when the ringer volume is set to
off. The cordless handset will ring at a low level.
Intercom Operation
(TALK)