Sony SPP-A2770 Cordless Telephone User Manual


 
Getting Started
19
US
Getting Started
To enter the local area code (For 10 digits
phone numbers users)
If a call matches one of the local area codes you entered, the phone
number will be registered with 10 digits in the Caller ID list (area code
+ number). If a call does not match one of the local area codes you
entered, the phone number will be registered with 11 digits in the
Caller ID list (1 + area code + number). Some regions of the country
allow you to have more than one local area code. (Up to five local area
codes can be entered in this phone.)
1 Perform steps 1 and 2 on page 17.
2 Select the number (“LOCAL 1” to “LOCAL 5”)
to enter the local area code by turning Jog Dial.
3 Press Jog Dial.
“ENTER LOCAL AREA CODE 1” appears on
the display when you select “LOCAL 1” in step
2.
4 Enter the three digits of the local area code using
the dialing keys.
5 Press (PGM).
You hear a long confirmation beep.
Notes
If the local area code is already entered, it appears on the display in step 2.
To enter a different local area code, see “To change the local area code” on
page 20.
Do not allow more than 60 seconds to elapse during the operation procedure.
If the local area code is not correctly entered, “ERROR” will appear on the
display and five short error beeps will be heard after (PGM) is pressed in
step 5. Move the cordless handset closer to the base unit, make sure the base
unit* is not in use before you start the setting.
* If the system includes additional cordless handsets, it is necessary to stop
using them before you start the setting as well.
Tips
When you select “(GO BACK)”, you can return to the previous set display by
pressing Jog Dial.
To check the current local area code, perform steps 1 and 2. The local area
code appears on the display for about 60 seconds.
HOME :
LOCAL 1:
LOCAL 2:
RING OFFMASSAGEOLDNEW
continued