Filter
Top Products
41
US
Telephone Features
Telephone Features
Notes
• If you try to save a 51st phone number, you will hear five short error beeps
and “THE MEMORY IS FULL” will be displayed. You cannot store the
phone number. To store another phone number, erase one of the stored
phone numbers (see page 45).
• Names cannot be entered using the dialing keys.
• Do not allow more than 60 seconds to elapse during the operation procedure.
Tips
• When you select “(GO BACK)”, you can return to the previous set display by
pressing Jog Dial.
• If you have entered a wrong name or number in step 3 or 5, turn Jog Dial to
choose “P” then press Jog Dial or press (ERASE) to erase it. Then enter the
correct name or number.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 5 on page 40, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press (REDIAL/PAUSE).
To store the dialed phone number into the Phone Directory
The dialed phone numbers of up to 20 digits can be stored in the
Phone Directory.
1 Press (REDIAL/PAUSE).
2 Display the name or phone number you want to call by
turning Jog Dial, and then press Jog Dial.
3 Turn Jog Dial to choose “PROGRAM”, and then press Jog
Dial.
4 Enter the name by doing steps 3 and 4 on pages 39 to 40.
5 Press (PGM).
You hear a long confirmation beep, and the name and the
number are stored.
continued