Filter
Top Products
30
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 US A-BTH-100-11 (1)
B Your CLIÉ handheld and the wireless LAN access point may be too far
away.
You need to be closer to the wireless LAN access point when trying to
connect to it.
B SSID may be set to be hidden from the wireless LAN access point side.
In such a case, your CLIÉ handheld cannot detect it via the scan operation.
B The wireless LAN access point may not be connected to the Internet.
Connect the wireless LAN access point to the Internet.
b
For connection details, refer to the manual of the wireless LAN access point.
B The network settings may not be correct.
Ask the System Administrator of your wireless LAN network for the
settings.
B Some obstacles, such as metal plate or concrete, are in the way between your
CLIÉ handheld and the wireless LAN access point.
Move your CLIÉ handheld or the wireless LAN access point to find the best
reception, or deselect [PowerSaveMode:] in the Wireless LAN Setup
screen. (Note that if you deselect [PowerSaveMode:], the battery power is
consumed more quickly.)
You can deselect [PowerSaveMode:] by following the steps below.
1 Select [Network] in the Preferences screen.
2 Tap [V Service:] to select [Wireless LAN].
3 Tap [Details...].
The Wireless LAN Setup screen is displayed.
4 Select one from the profile names in the list of [Profile Name:].
5 Tap [Edit], then tap [Advanced Setup].
6 Deselect [PowerSaveMode:] by tapping to change to
B Your CLIÉ handheld may be accessing the target wireless LAN access point
at the channel which is also used by more than the target one.
Change to another wireless LAN access point channel.
b
For details on changing channels, refer to the manual of the wireless LAN access
point.
I cannot connect to the Internet via a wireless LAN
(for PEG-TJ37 only) (continued)
01US01COV.book Page 30 Monday, December 8, 2003 11:33 AM