Filter
Top Products
29
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 US A-BTH-100-11 (1)
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I cannot connect to the Internet
(for PEG-TJ37 only)
B Check that [Profile Name:] is correctly selected in the Wireless LAN
Setup screen, which can be displayed by tapping [Network]-[V Service:]-
[Wireless LAN]-[Details…] in the Preferences screen.
B Check that the settings for [Profile Name:], [WEP:] or [KEY:] are correct in
the Wireless LAN Setup screen, which can be displayed by following the
procedure below.
1 Select [Network] in the Preferences screen.
2 Tap [V Service:] to select [Wireless LAN].
3 Tap [Details...].
The Wireless LAN Setup screen is displayed.
4 Select one from the profile names in the list of [Profile Name:].
5 Tap [Edit].
B Your CLIÉ handheld may be connected to a wireless LAN access point
other than the target one when [-Auto Connect-] is selected.
In the Wireless LAN Setup screen, check that the target wireless LAN
access point is listed just below [-Auto Connect-] and [-Auto Connect-] is
selected.
(The list can be reordered by tapping or .)
You can also select the profile name for the target wireless LAN access
point instead of selecting [-Auto Connect-] from [Profile Name:] in order to
explicitly connect to the target one.
B The channel setting must be from channels 1-11 for the wireless LAN access
point.
Change the channel setting to an appropriate channel.
b
For details on setup, refer to the manual of the wireless LAN access point.
I cannot connect to the Internet via a wireless LAN
(for PEG-TJ37 only)
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • •
01US01COV.book Page 29 Monday, December 8, 2003 11:33 AM