Filter
Top Products
Adjusting settings via the operating menu
26
Displaying the software revision
You can display the current software revision of the receiver.
̈ For information on software updates, visit the corresponding product page on our website
at www.sennheiser.com.
The “Sync-Settings” submenu
“SK Settings”, “SKM Settings” and “SKP Settings”
Via the “SK Settings”, “SKM Settings” and “SKP Settings” submenus, you can set the trans-
mitter parameters directly on the receiver and activate or deactivate the transfer of these
parameters to the transmitter:
By pressing the button ¿
, you can transfer the parameters to the transmitters
(see page 14).
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Advanced Menu
Display Function
SK Settings Calls up the “SK Settings” submenu
SKM Settings Calls up the “SKM Settings” submenu
SKP Settings Calls up the “SKP Settings” submenu
Exit Exits the “Sync Settings” submenu and returns to the extended menu
“Advanced Menu”
SK Settings
SKM Settings
SKP Settings
Exit
Sync Settings
Setting Transfer is ...
... activated
... deactivated
Display Function Settings
Sensitivity Adjusts the input sensitivity:
SK –60 dB to 0 dB,
adjustable in steps of 3 dB
SKM and SKP –48 dB to 0 dB,
adjustable in steps of 6 dB
Low Cut (SKM only) Low cut filter can be activated/deactivated
Auto Lock Lock mode Inactive, Active
Mute Mode (SK, SKP only) Mute mode Disabled, RF On/Off, AF On/Off
RF Power Transmission power Low, Standard, High
Sensitivity
-60 dB
Sync
PEAK
-10
0
40
30
20
10
-20
-30
-40
AF
RF
Sensitivity
-60 dB
Sync
PEAK
-10
0
40
30
20
10
-20
-30
-40
AF
RF