Filter
Top Products
Putting the receiver into operation
10
Connecting the rod antennas to the rear of the receiver
̈
Connect the rod antennas ƿ (see diagram).
̈ Align the antennas in a V-shape.
Mounting the antennas to the front of the rack
To mount the antenna connections to the front of the rack when rack mounting the receiver,
you require the AM 2 antenna front mount kit (optional accessory). The AM2 consists of:
• 2 BNC extension cables (screw-in BNC socket to BNC connector),
•4 washers ,
•2 nuts .
̈ Unsecure the rack mount “ears” ³ from the rack.
̈ Guide the BNC cables through the holes in the rack mount “ears” ³.
̈ Connect the two BNC connectors of the BNC cables to the BNC sockets ƻ and ƾ of the
receiver.
̈ Slide the receiver into the 19” rack.
̈ Resecure the rack mount “ears” ³ to the rack.
ƿ
ƾ
ƻ
³
³
ƿ
ƿ