Sennheiser EM 2050 Cordless Telephone User Manual


 
Using the operating menu
17
Display Function of the menu item Page
Main menu “Menu”
Squelch Adjusts the squelch threshold 20
Easy Setup Scans for unused frequency presets, releases and selects frequency presets 21
Frequency Preset Changes the frequency bank and the channel 21
Name Enters a freely selectable name 21
AF Out Adjusts the audio output level 22
Equalizer Changes the frequency response of the output signal 22
Auto Lock Activates/deactivates the automatic lock mode 22
Advanced Calls up the extended menu “Advanced Menu 23
Exit Exits the operating menu and returns to the current standard display -
“Easy Setup”
Reset List Releases all locked frequency presets and selects an unused frequency preset
21Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits the submenu “Easy Setup” and returns to the main menu -
Extended menu “Advanced Menu”
Tune Sets the receiving frequencies for the frequency banks “U1” to “U6 23
Special function: Sets a channel and a receiving frequency for the frequency banks
U1” to “U6
23
Guitar Tuner Selects the mode of the guitar tuner function 24
Sync Settings Activates/deactivates the parameters to be transferred to the transmitters 17
Pilot Tone Activates/deactivates the pilot tone evaluation 24
Warnings Activates/deactivates the warning messages 27
LCD Contrast Adjusts the contrast of the display panel 25
Reset Resets the receiver 25
IP-Address Adjusts the IP address of the receiver 25
Software Revision Displays the current software revision 26
Exit Exits the extended menu “Advanced Menu” and returns to the main menu -
Submenu “Sync Settings”
SK Settings Activates/deactivates the parameters to be transferred to SK bodypack
transmitters
24
SKM Settings Activates/deactivates the parameters to be transferred to SKM radio microphones
SKP Settings Activates/deactivates the parameters to be transferred to SKP plug-on
transmitters
Exit Exits the submenu “Sync Settings” and returns to the extended menu “Advanced
Menu