Filter
Top Products
77
Activating/deactivating the lock mode
The transmitter has a lock mode that prevents accidental programming or
switching the power off during operation. However, you can still mute the
microphone.
̈
Press the
SET
button
ᕧ
.
̈
Press the
̄
button (DOWN)
ᕨ
. “LOCK” appears on the display. The lock
mode is activated and the lock mode icon
ብ
appears on the standard
display.
̈
To deactivate the lock mode, press the
SET
button
ᕧ
again and keep it
pressed.
̈
Press the
̄
button (DOWN)
ᕨ
. “UNLOCK” appears on the display. The
lock mode is deactivated and the lock mode icon
ብ
disappears from the
standard display.
Displaying the frequency
You can display the frequency stored in the selected channel. If you operate
your system on one of the channels with a freely selectable frequency
(channel bank “U”), this feature is very important as it allows you to check
if transmitter and receiver are set to the same frequency.
̈
Press the
SET
button
ᕧ
and keep it pressed.
̈
Press the
̆
button (UP)
ᕨ
. The current frequency is displayed.
º
¶
ብ
¶
º