Filter
Top Products
69
Attaching and positioning the microphones
The MKE 2015-2 clip-on microphone (supplied) and the MKE 2015-0 plug-
on microphone (optional accessory) are omni-directional and pick up sound
equally from all directions. They are the best choice if movements of the
speaker’s head have to be compensated for. However, they should be
attached as close as possible to the sound source.
Use the microphone clip
to attach the MKE 2015-2 clip-on microphone to
clothing (e.g. tie, lapel) at a maximum distance of 9.8 inches from your
mouth.
When using the MKE 2015-0 plug-on microphone, wear the transmitter
around your neck using the EZG 2015 pouch with neck strap. Adjust the
length of the neck strap so that the distance between the microphone and
your mouth is 9.8 inches at the most.
You can use the MKE 2015-0 plug-on microphone to transmit the speech of
several persons at a time with only one transmitter. Put the transmitter
with the plug-on microphone on the table in front of the speaker. The per-
son speaking should keep a distance of approx. 9.8 inches to the micro-
phone.
The ME 2015-H headset microphone (optional accessory) has a super-car-
dioid pick-up pattern.
̈
Adjust the ME 2015-H headset microphone so that a comfortable and
secure fit is ensured.
̈
Position the microphone of the headset at the corner of your mouth.
̈
Make sure that the sound inlet is directed towards your mouth. The
sound inlet is marked with a little dot.
MKE 2015-2
MKE 2015-0
ME 2015-H