68
How to properly use the battery pack or the batteries
For battery pack operation, only use the BA 2015 battery pack in order to
ensure optimum operational reliability. Batteries and rechargeable battery
cells have different discharging curves. Transmitter and receiver are able to
identify the BA 2015 battery pack and to use it to full capacity. They also
adapt the battery status display according to the type of power supply used
(batteries or battery pack). Individual rechargeable battery cells will not be
identified as battery packs.
̈
After use (e.g. during the night), charge the BA 2015 battery pack of
the transmitter or receiver in the L 2015 charger. The maximum char-
ging time is 2.5 hours, at which time the unit then switches to trickle
charging.
̈
If you do not use the transmitter or receiver for extended periods of
time (e.g. while you are on holiday), remove the battery pack or the
batteries. After three months at the latest, the battery packs will need
a refresh charge in the L 2015 charger. This prevents damage to the
battery pack due to self-discharge.
Connecting sound sources to the transmitter
Connecting the microphones to the transmitter
In addition to the supplied MKE 2015-2 clip-on microphone, a plug-on
microphone (MKE 2015-0) and a headset microphone (ME 2015-H) are
available as optional accessories. DC powering of these condenser micro-
phones is via the microphone input.
̈
Connect the 2.5 mm jack plug of the microphone or the microphone
cable to the transmitter’s 2.5 mm jack socket (MIC)
ᕢ
.
̈
Via the operating menu, adjust the sensitivity of the microphone input
(see “Adjusting the microphone sensitivity“ on page 82).
·